China Sensible Code Set Length 2 - Wasp WDI4600 Product Reference Manual

China Sensible Code

China Sensible Code Set Length 2

This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in increments of
0001 (pad with zeroes).
See page 217
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
for detailed instructions on setting this feature.
DEFAULT
China Sensible Code Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
Length 2 is 7,827 Characters
Enter/Exit Programming Mode
Control.
representing your
CANCEL
179