Micro Pdf417 Set Length 2 - Wasp WDI4600 Product Reference Manual

Micro PDF417

Micro PDF417 Set Length 2

This feature specifies one of the barcode lengths for
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length includes the barcode's data characters only. Characters can be set from 0001 to 0366
characters (pad with zeroes) in increments of 01. Any value greater than 0366 will be considered
to be 0366.
See page 217
$CMIL2
Select Micro PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
for detailed instructions on setting this feature.
DEFAULT
Micro PDF417 Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
Length 2 is 0366 Characters
Enter/Exit Programming Mode
Control. Length 2 is
representing your
CANCEL
191