Gs1 Databar™ Expanded Set Length 2 - Wasp WDI4600 Product Reference Manual

GS1 DataBar™ Expanded
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in
in Fixed Length
set from 1 to 74 characters. A setting of 0 specifies to ignore this length (only one fixed length).
Table 18
setting this feature.
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode. Length includes the barcode's data characters only. The length can be
provides examples for setting Length 2. See
00 (ignore sec-
ond length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
74 = Length 2 is 74 Characters
DEFAULT
Enter/Exit Programming Mode
GS1 DataBar™ Expanded Length
Variable Length Mode, or the second fixed length if
page 217 for detailed instructions on
EXAMPLES
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
Control.
74 Characters
'7' and '4'
155