Code 128 Set Length 1 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Code 128 Set Length 1

Specifies one of the barcode lengths for
label length if in
Length includes the barcode's data characters only. The length can be set from 1 to 80
characters.
Table 5
setting this feature.
Table 5. Code 128 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC8L1
Select Code 128 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
116
Variable Length
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 128 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 128 Length Control. Length 1 is the minimum
Mode, or the first fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Code 128
Fixed Length Mode.
for detailed instructions on
80 Characters
'1' and '5' '8' AND '0'
CANCEL
WDI4600