Codabar Set Length 2 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Codabar Set Length 2

This feature specifies one of the barcode lengths for
Control. Length 2 is the maximum label length if in
length if in
characters. The length must include at least one data character.
The length can be set from 3 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 14
setting this feature.
Table 14. Codabar Length 2 Setting Examples
STEP ACTION
Desired Setting (and pad
1
with leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CCBL2
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
142
Fixed Length Mode. The length includes the barcode's start, stop, check and data
provides examples for setting Length 2. See
00 Ignore This
Length
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABAR LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
50 = Length 2 is 50 Characters
DEFAULT
Codabar Length ControlCodabar Length
Variable Length
page 217 for detailed instructions on
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
Codabar
Mode, or the second fixed
50 Characters
'5' AND '0'
WDI4600