Usb-Oem Device Usage; Interface Options - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

USB-OEM Device Usage

The USB-OEM protocol allows for the reader to be identified as one of two different types of
barcode scanners. Depending on what other scanners you may already have connected to a
USB-OEM POS, you may need to change this setting to enable all devices to communicate.
Options are:
It may be necessary to switch device usage when connecting two readers/scanners of the same
type to a POS system.
$CIBUT01(CR)
USB-OEM Device Usage = Handheld Scanner

Interface Options

This feature provides for an interface-specific control mechanism.
$CIFO102(CR)
Ignore Scanner Configuration Host Commands
42
• Table Top Scanner
• Handheld Scanner
$CIBUT00(CR)
USB-OEM Device Usage = Table Top Scanner
DEFAULT
$CIFO101(CR)
Obey Scanner Configuration Host Commands
DEFAULT
USB-OEM Interface
WDI4600