Codabar Set Length 1 - Wasp WDI4600 Product Reference Manual

Codabar

Codabar Set Length 1

This feature specifies one of the barcode lengths for
Control. Length 1 is the minimum label length if in
length if in
characters. The length must include at least one data character. The length can be set from 3 to
50 characters.
Table 13
setting this feature.
Table 13. Codabar Length 1 Setting Examples
STEP ACTION
Desired Setting (and pad
1
with leading zeroes)
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Fixed Length Mode. Length includes the barcode's start, stop, check and data
provides some examples for setting Length 1. See
03 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODABAR LENGTH 1 SETTING
'0' and '3'
Scan ENTER/EXIT PROGRAMMING MODE
03 = Length 1 is 3 Characters
DEFAULT
Enter/Exit Programming Mode
Codabar Length ControlCodabar Length
Variable Length
page 217
EXAMPLES
09 Characters 15 Characters
'0' and '9' '1' and '5'
~
CANCEL
Mode, or the first fixed
for detailed instructions on
50 Characters
'5' AND '0'
141