Standard 2 Of 5 Set Length 1 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
the minimum label length if in
Length
from 1 to 50 characters.
Table 9
instructions on setting this feature.
Table 9. Standard 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
130
Variable Length
Mode. Length includes the barcode's check and data characters. The length can be set
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Standard 2 of 5 Length
Mode, or the first fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
08 = Length 1 is 8 Characters
Standard 2 of 5
Control. Length 1 is
Fixed
if you want detailed
50 Characters
'1' and '5' '5' AND '0'
CANCEL
WDI4600