I 2 Of 5 Set Length 1 - Wasp WDI4600 Product Reference Manual

Interleaved 2 of 5 (I 2 of 5)

I 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length
Mode. The length includes the barcode's check and data characters. The length can be set from
2 to 50 characters in increments of two.
Table 7
setting this feature.
Table 7. I 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
$CI2L1
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
provides some examples for setting Length 1. See
2 Characters
02
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT I 2 of 5 LENGTH 1 SETTING
'0' and '2'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
I 2 of 5 Length
page 217
EXAMPLES
6 Characters 14 Characters
06
'0' and '6'
~
06 = Length 1 is 6 Characters
Enter/Exit Programming Mode
Control. Length 1 is the
for detailed instructions on
50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL
125