Aztec Code Set Length 1 - Wasp WDI4600 Product Reference Manual

Aztec Code

Aztec Code Set Length 1

Specifies one of the barcode lengths for
label length if in
Characters can be set from 0001 to 3,832 characters in increments of 0001 (pad with zeroes).
See page 217
$CAZL1
Select Aztec Code Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length Mode, or the first fixed length if in Fixed Length Mode.
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Aztec Code Length Control. Length 1 is the minimum
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
CANCEL
representing your
175