Plessey Set Length 1 - Wasp WDI4600 Product Reference Manual

Plessey

Plessey Set Length 1

This feature specifies one of the barcode lengths for
minimum label length if in
Mode. Length includes the barcode's data characters only. The length can be set from 01 to 50
characters.
Table 23
setting this feature.
Table 23. Plessey Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CPLL1
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
provides some examples for setting Length 1. See
01 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT Plessey LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Plessey Length
Mode, or the first fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Enter/Exit Programming Mode
Control. Length 1 is the
Fixed Length
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
169