Industrial 2 Of 5 Set Length 1 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Industrial 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
is the minimum label length if in
Length
to 50 characters.
Table 11
instructions on setting this feature.
Table 11. Industrial 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CU2L1
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
134
Mode. Length includes the barcode's data characters only. The length can be set from 0
provides some examples for setting Length 1. See
00 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 1 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Industrial 2 of 5 Length
Variable Length Mode, or the first fixed length if in
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
Industrial 2 of 5
Control. Length 1
page 217 if you want detailed
50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed
WDI4600