Industrial 2 Of 5 Set Length 2 - Wasp WDI4600 Product Reference Manual

Industrial 2 of 5

Industrial 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
is the maximum label length if in
Length
length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 12
setting this feature.
Table 12. Industrial 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CU2L2
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Industrial 2 of 5 Length
Variable Length Mode, or the second fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Control. Length 2
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
Fixed
135