I 2 Of 5 Set Length 2 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. The length includes the barcode's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 8
this feature.
Table 8. I 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3
4
Scan Two Characters From
5
Appendix D, Keypad
6
$CI2L2
Select I 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
126
Variable Length
provides examples for setting Length 2. See
Ignore This
Length
00
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT I 2 OF 5 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
I 2 of 5 Length
Mode, or the second fixed length if in
page 217
EXAMPLES
4 Characters 14 Characters
04
'0' and '4'
~
50 = Length 2 is 50 Characters
Interleaved 2 of 5 (I 2 of 5)
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL
WDI4600