Data Matrix Set Length 2 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Data Matrix Set Length 2

This feature specifies one of the barcode lengths for
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length Mode. Characters can be set from 0001 to 3,116 characters in increments of 0001 (pad
with zeroes).
See page 217
$CDML2
Select Data Matrix Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
182
for detailed instructions on setting this feature.
DEFAULT
Data Matrix Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
Length 2 is 3,116 Characters
Data Matrix
Control. Length 2 is
representing your
CANCEL
WDI4600