China Sensible Code Set Length 1 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode
China Sensible Code
Specifies one of the barcode lengths for
minimum label length if in
Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See page 217
$CCSL1
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
178
Set Length 1
Variable Length
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
China Sensible Code Length
Mode, or the first fixed length if in Fixed Length
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits from the Alphanumeric char-
Appendix D, Keypad
acters in
desired character(s). End by scanning the ENTER/EXIT
barcode again.
~
CANCEL
China Sensible Code
Control. Length 1 is the
representing your
WDI4600