Individually Set Label Id; Label Id Control - Wasp WDI4600 Product Reference Manual

Data Format

Individually Set Label ID

This feature configures a Label ID individually for a single symbology. To set, first define
whether you want it as a prefix or suffix by scanning a label below. Then turn to
Symbology Selection • 1D Symbologies, starting on page 50
to set, followed by up to 3 characters from the ASCII Chart at the back of this manual. See
"Label ID: Set Individually Per Symbology" on page 224
feature.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given
symbology type.
DEFAULT
$CIDCO01(CR)
Label ID Transmission = Enable as Prefix
Product Reference Guide
Enter/Exit Programming Mode
to select the symbology you want
for detailed instructions on setting this
$CIDCO00(CR)
Label ID Transmission = Disable
$CIDCO02(CR)
Label ID Transmission = Enable as Suffix
Label ID
49