Code 128 Set Length 2 - Wasp WDI4600 Product Reference Manual

Code 128

Code 128 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's data characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 6
this feature.
Table 6. Code 128 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 128 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 128 Length
Mode, or the second fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
80 = Length 2 is 80 Characters
Enter/Exit Programming Mode
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
80 Characters
'1' and '5' '8' and 0'
CANCEL
117