Industrial 2 Of 5 Check Character Transmission; Industrial 2 Of 5 Length Control - Wasp WDI4600 Product Reference Manual

Industrial 2 of 5 Enter/Exit Programming Mode

Industrial 2 of 5 Check Character Transmission

Enables/disables transmission of an Industrial 2 of 5 check character.
$CU2CT00(CR)
Industrial 2 of 5 Check Character Transmission = Disable
$CU2CT01(CR)
DEFAULT
Industrial 2 of 5 Check Character Transmission = Enable

Industrial 2 of 5 Length Control

This feature specifies either variable length decoding or fixed length decoding for the Industrial
2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
$CU2LC00(CR)
DEFAULT
Industrial 2 of 5 Length Control = Variable Length
$CU2LC01(CR)
Industrial 2 of 5 = Fixed Length
Product Reference Guide 133