Character Conversion - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs
represented in hexadecimal ASCII values. The first character in the pair is the character that will
be converted. The second character in the pair is the character to convert to. If the character to
convert in a pair is FF, then no conversion is done.
56
If less than the expected string of 16 characters are selected, scan the ENTER/
EXIT barcode twice to accept the selections and exit Programming Mode.
DEFAULT
(No character conversion)
$CLFCH
Configure Character Conversion
0xFFFFFFFFFFFFFFFF
Data Format
WDI4600