Enter/Exit Programming Mode
Multiple Labels Ordering by Code Symbology
This feature allows you to specify the order multiple labels are transmitted by symbology type,
when Multiple Labels per Frame is enabled. See
information on setting this feature.
$CSNMS
Select Symbologies for Multiple Labels Ordering
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Multiple Labels Ordering by Code Length
Specifies the transmission ordering by code length, when Multiple Labels per Frame is enabled.
$CSNMT01(CR)
Transmit Increasing Length Order
78
000000000000 = Random order
DEFAULT
DEFAULT
page 234
in "References" for detailed
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE barcode above, then the barcode at
left followed by the digits From the alphanumeric char-
acters In Appendix d, keypad representing your desired
Character(s). end by scanning the enter/exit barcode
again.
~
CANCEL
$CSNMT00(CR)
Multiple Labels Ordering = Disable
$CSNMT02(CR)
Transmit Decreasing Length Order
Reading Parameters
WDI4600