Msi Set Length 2 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode

MSI Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Length
The length does not include start/stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
Table 22
setting this feature.
Table 22. MSI Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CMSL2
Select MSI Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
166
Variable Length
Mode. Length includes the barcode's check, data, and full-ASCII shift characters.
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT MSI LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
MSI Length Control
Mode, or the second fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
. Length 2 is the
for detailed instructions on
50 Characters
'1' and '5' '5' AND '0'
CANCEL
MSI
Fixed
WDI4600