Code 39 Set Length 2 - Wasp WDI4600 Product Reference Manual

Code 39

Code 39 Set Length 2

This feature specifies one of the barcode lengths for
maximum label length if in
Mode. Length includes the barcode's check, data, and full-ASCII shift characters. The length
does not include start/stop characters.
Table 4
this feature.
Table 4. Code 39 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CC3L2
Select Code 39 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
Variable Length
provides examples for setting Length 2. See
00 (Ignore This
Length)
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT CODE 39 LENGTH 2 SETTING
'0' and '0'
Scan ENTER/EXIT PROGRAMMING .MODE
DEFAULT
Code 39 Length
Mode, or the second fixed length if in
page 217
EXAMPLES
07 Characters 15 Characters
'0' and '7'
~
50 = Length 2 is 50 Characters
Enter/Exit Programming Mode
Control. Length 2 is the
Fixed Length
for detailed instructions on setting
50 Characters
'1' and '5' '5' AND '0'
CANCEL
107