Gs1 Databar™ Expanded Set Length 1 - Wasp WDI4600 Product Reference Manual

Enter/Exit Programming Mode
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the barcode lengths for
Length 1 is the minimum label length if in
Fixed Length
from 1 to 74 characters.
Table 17
setting this feature.
Table 17. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
$CXBL1
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
154
Mode. Length includes the barcode's data characters only. The length can be set
provides some examples for setting Length 1. See
01 Character
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
DEFAULT
GS1 DataBar™ Expanded Length
Variable Length Mode, or the first fixed length if in
page 217
EXAMPLES
07 Characters 52 Characters
'0' and '7'
~
01 = Length 1 is 1 Character
GS1 DataBar™ Expanded
for detailed instructions on
74 Characters
'5' and '2' '7' AND '4'
CANCEL
WDI4600
Control.