Viewing Registration Status; Table 3-40: Call Routing Status Parameters - AudioCodes Mediant 600 User Manual

Parameter
Call-Routing Method
IP Address
State
3.5.2.6

Viewing Registration Status

The 'Registration Status' page displays whether the device, its endpoints, SIP Accounts,
and BRI endpoints are registered to a SIP Registrar/Proxy server.

To view Registration status:

Open the 'Registration Status' page (Status & Diagnostics tab > VoIP Status menu
> Registration Status).

Registered Per Gateway:
•
'YES' = registration is per device
•
'NO' = registration is not per device

Ports Registration Status:
•
'REGISTERED' = channel is registered
•
'NOT REGISTERED' = channel not registered

Accounts Registration Status: registration status based on the Accounts table
(configured in ''Configuring Account Table'' on page 128):
•
Group Type: type of served group - Trunk Group or IP Group
•
Group Name: name of the served group, if applicable
SIP User's Manual

Table 3-40: Call Routing Status Parameters


Proxy/GK = Proxy server is used to route calls.

Routing Table = The 'Outbound IP Routing Table' is used to route
calls.

Not Used = Proxy server isn't defined.

IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.

N/A = Proxy server isn't defined.

OK = Communication with the Proxy server is in order.

Fail = No response from any of the defined Proxies.
Figure 3-143: Registration Status Page
216
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83308