Step 2: Installing The Camera - Basler CXP-12 Quick Install Manual

HARDWARE INSTALLATION
Note: If you want to use multiple interface cards in the same computer,
make sure that you have one PCIe 3.0 x4 slot per card on the main board
of that computer.
Use an adequate ventilation system within your computer and leave
sufficient free space between your interface card and other cards, if you
use any.
5. Put the case of the computer back together.

Step 2: Installing the Camera

1. Make sure that the camera is disconnected from any power supply.
NOTICE
Contamination Hazard: Dust on the sensor may impair the camera's
performance.
Make sure that the camera is pointing down during the next installation
steps.
2. Remove the seal from the camera front.
3. Attach a mount to the camera.
8