2 Camera Interface
2.1 Connections
2.1.1 General Description
The A101
is interfaced to external circuitry via an IEEE 1394 socket and a 9-pin micro-D plug
f
located on the side of the housing. Figure 2-1 shows the location of the two connectors. There are
also two status LEDs on the back of the camera. The LEDs indicate signal integrity and power OK
(see Section 6.1).
Green LED
(Power OK)
Yellow LED
(Signal Integrity)
Figure 2-1: Camera Connectors and Indicators
f
BASLER A101
DRAFT
Camera Interface
9 Pin
Micro D
Plug
IEEE
1394
Socket
2-1