Table of Contents
Advertisement
AW00136902000
2 Precautions
Electric Shock Hazard
Unapproved power supplies may cause electric shock. Serious injury or death
may occur.
You must use power supplies which meet the Safety Extra Low Voltage (SELV)
and Limited Power Source (LPS) requirements.
Fire Hazard
Unapproved power supplies may cause fire and burns.
You must use power supplies which meet the Limited Power Source (LPS)
requirements.
Dust on the sensor can impair the camera's performance.
Every time you handle the camera without a lens attached, make sure that the camera is
pointing down so that no dust can reach the sensor.
If the camera is not installed, store it in its original packaging.
Heat can damage the camera.
Make sure that you provide sufficient heat dissipation to keep the operation temperature of the
device below the values indicated in Section 3.6.1 on
providing heat dissipation, see Section 3.6.2 on
Basler dart BCON
DANGER
WARNING
NOTICE
NOTICE
page
21. For more information about
page
22.
Precautions
3
Advertisement
Table of Contents
