Power; Environment Conditions - Sharp JX-8200 Service Manual

SHARP SERVICE MANUAL JX8200SM [3] SPECIFICATION

5. Power

Power supply
Engine Type Voltage
120 V 108 - 132 V
220/240 V 198 - 264 V
Power consumption
Maximum: 1200 W
Stand by mode: 45 W
Sleep mode: Max. 30 W

6. Environment conditions

(1) Environmental condition: Temperature and humidity condition
To keep good machine condition and
guarantee print quality, environmen-
tal condition is determined as follows
and they are applied for both
machine and supply.
a. Operating condition: Condition where the machine nor-
mally operates, which include sup-
plies.
Max. alteration: 10°C/hour, 10%
RH/hour
– No dewing shall remain.
RH
70%
20%
15˚C
Temperature
Standard condition: Condition where density, backgrounds
are measured
20°C ∼ 25°C, 65 ±5% RH
Air pressure: Normal air pressure to 595 hpa
* under operating and non-operating
condition
* 595 hpa is equivalent to 2,000 m al-
titude
b. Non operating condition: Condition where supplies are set in the
machine and the machine is left in the
room with power off.
5°C ∼ 40°C, 10% RH ∼ 90% RH
– No dewing shall remain.
Storage condition (packed in the packing material)
Max.
RH/hour
– No dewing shall remain.
F
60 Hz
50/60 Hz
Humidity (20~70%)
27˚C
alteration: 15°C/hour, 15%
(Machine)
RH
90%
10%
-10°C
Temperature
(Supply)
RH
90%
10%
-10°C
Temperature
Transport condition (pack in the packing material)
(Machine)
RH
90%
10%
-10°C
Temperature
(Supply)
RH
90%
10%
-10°C
Temperature
c. Storage guarantee period
Photoconductor cartridge:
Toner/Developer:
The storage period is specified packed and sealed condition.
Air pessure
Normal air pressure to 595 mmHg 595 mmHg equivalent to 2000 m
altitude
3 – 5
Humidity
40°C, 90%
50°C, 60%
50°C
Humidity
40°C, 90%
40°C
Max. alteration: 20°/hour, 15% RH/hour
– No dewing shall remain.
Humidity
40°C, 90%
50°C, 60%
50°C
Humidity
40°C, 90%
40°C
36 months from the manufacturing
month
24 months from the manufacturing
month