Sharp JX-8200 Service Manual page 144

SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(6) Paper feed roller/Paper feed roller clutch
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the paper pick-up clutch solenoid and the paper pick-up
roller clutch. (Refer to the C-7/13.)
3
Remove the paper feed roller clutch.
Note: When assembling, check that the solenoid flapper is properly
connected to the sleeve. Check that the paper pick-up roller
stops at the normal position.
4
Remove the paper transport roller.
Paper feed
roller clutch
Paper transport
roller
12 – 12
Note for assembly:
When attaching the option paper feed unit, attach the drive gear as
shown in the figure. After attaching, push the frame with fingers and
check that the drive gear is lifted up.
Lift-up
Push