Sharp JX-8200 Service Manual page 140

SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
4
Remove the paper transport roller gear and paper transport roller.
Paper transport
roller
(11) Charger roller
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the waste toner sensor cover, and remove the waste
toner sensor.
3
Remove the waste toner box cover.
Waste toner sensor
Note: When assembling, check that the waste toner box moves
smoothly.
4
Remove the spring and the charger roller unit.
Note: When assembling, check that the charger roller unit moves
smoothly.
Paper
transport
roller gear
Waste toner sensor cover
Waste toner
box cover
Charger roller unit
12 – 8
5
Remove the charger roller spring R and L, and remove the
charger roller.
Charger roller spring
Note: When attaching the charger roller spring to the charger
roller unit, check that a tension is applied to the charger
roller.
(12) Upper resist roller
1
Remove the paper feed unit. (Refer to the C-1.)
2
Remove the waste toner sensor cover, and remove the waste
toner sensor.
3
Remove the waste toner box cover.
Waste toner sensor
Note: When assembling, check that the waste toner box moves
smoothly.
4
Remove each clutch and gear.
Charger roller spring
Waste toner sensor cover
Waste toner
box cover