Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
(4) Fusing unit wire
1
Remove the fusing unit.
2
Remove the operation cabinet.
(Refer to the A-4.)
3
Remove the right cabinet.
(Refer to the A-3.)
4
Remove the harness cover.
Fusing unit connector
5
Remove the connector from the PCU PWB.
6
Remove the fusing unit wire.
(5) Transfer drum cleaning clutch solenoid
1
Remove the operation cabinet.
(Refer to the A-4.)
2
Remove the transfer drum cleaning clutch solenoid.
Transfer drum cleaning solenoid
(6) Transfer drum cleaner clutch
1
Remove the operation cabinet.
(Refer to the A-4.)
2
Remove the transfer drum cleaning clutch solenoid.
Harness
cover
PCU PWB
Transfer drum cleaning solenoid
12 – 14
Advertisement
Table of Contents
