Sharp JX-8200 Service Manual page 152

SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
6
Remove the right and left arms (lower) of the transfer unit.
Transfer drum frame
(Transfer drum
bearing section)
7
Slide the transfer unit fixing pin (left) toward the inside. (Do not
pull it out.)
Transfer unit
lower arm L
Transfer unit
fixing screw (left)
Transfer unit
lower arm R
8
Remove the paper exit unit. (Do not pull out the transfer unit fixing
pin.)
9
Hold the transfer unit with your hand and pull out the transfer unit
fixing pins (left and right) from the inside. Then the transfer unit
comes off.
(Note) Be careful not to scratch the transfer drum.
Transfer unit
lower arm L
F
Remove the transfer unit.
12 – 20
Harness cover
Transfer unit fixing pin
Transfer unit
Paper
exit unit