Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [5] INSTALLATION
2) Push the handles down and towards you until they click and lock
the fuser cleaner into place inside the fusing unit.
3) Close the fusing unit lid.
4) Close the front cabinet by depressing the front cabinet release
grips and gently pushing it forward.
(8) Loading Paper and Installing the Universal
Cassette
Load paper into the universal cassette by following the procedure
given below.
1) Remove the universal cassette.
NOTE: When using the universal cassette for the first time, be sure
to remove the securing tape that holds down the metal plate
inside the universal cassette before loading the paper.
2) Press down on the metal plate inside the universal cassette until it
clicks into place.
3) If you need to change the paper size of the universal cassette,
then you need to change the position of the vertical and horizontal
guides to match that of the desired paper size. The procedure for
adjusting the guides is given below.
Adjusting the vertical guide:
1
Lift out the inside tooth of the guide and then lift out the
outside tooth.
2
Move the guide to the paper size mark position
paper size you are going to load.
3
In the opposite order of step
guide into its hole, insert the inside tooth in its hole and fix the
guide to the universal cassette.
5 – 10
1
, insert the outside tooth of the
1
2
3
for the
Advertisement
Table of Contents
