Table of Contents
Advertisement
CONNECTING THE POWER CORD
Insert the power cord into the socket on the rear of the unit.
1
Connect the other end of the power cord to an outlet.
2
The unit will be turned on automatically.
Do not connect the unit to other than a local voltage outlet. Plugging the unit into
an incompatible power supply may cause irreparable damage.
When the power is turned on for the first time
The following message appears in the display when you turn on the unit for the first time
after purchasing it.
Once setup is completed, this message will no longer appear. After this, proceed to
"SELECTING THE DESIRED LANGUAGE FOR DISPLAY MESSAGES" (See the next page).
If any other messages appear, refer to "CANCELLING AN ERROR MESSAGE" (See page 72).
HOW TO SHUT OFF POWER
Press the "POWER" button
1
that nothing appears on the display panel.
Unplug the power cord from the outlet.
2
Auto Power Off
This unit turns off automatically when the scheduled period elapses after the last
operation. Press the "POWER" button (
before Auto Power Off can be changed (See Page 57).
Downloaded from:
http://www.usersmanualguide.com/
Language
2.English
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the "POWER" button (
maintain good copy or print quality.
To completely shut off the power, first turn off the power using the "POWER"
button (
). Then unplug the power cord.
Do not remove the power cord unit when in use.
When no print head is installed, the unit cannot be turned off by pressing
the "POWER" button (
to turn off the unit. Make sure
(
)
) to turn on the unit again. The period
).
) is off in order to
13
Advertisement
Table of Contents
