Table of Contents
Advertisement
SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
9
Remove the cam shaft upper.
Cam shaft lower
Drive unit
slide cam
F
Remove the cam shaft lower.
G
Remove the drive unit slide cam from each cam shaft.
(3) Drive belt
1
Remove the right cabinet, the back cabinet, and the upper
cabinet. (Refer to the A-1/2/3.)
2
Remove the drum motor unit.
Drum motor unit
Cam shaft upper
Drive unit
slide cam
3
Remove the drive belt A, then remove the drive belt B.
4
Remove the flywheel
5
Remove four clutch covers.
6
Remove the drive frame unit.
7
Remove the drive belt C from the drive frame unit.
8
Remove the drive belt D from the drive frame unit.
12 – 23
Drive belt A
Drive belt B
Drive frame unit
Clutch cover
Flywheel
Drive belt C
Drive belt D
Advertisement
Table of Contents
