Sharp JX-8200 Service Manual page 188

SHARP SERVICE MANUAL JX8200SM [13] ELECTRICAL SECTION
B. COMMAND (EX only)
(1) PJL
a. Addition and change of PJL command parameters
In this printer, PJL command parameters and their set values will be added to, changed from or deleted from the standard by the following reasons.
* Engine construction differs.
* Firmware differs.
(Addition)
The following parameters will be newly added to this printer.
Command Parameter
(DEFAULT) TOTALCOUNTER
(DINQUIRE)
(DEFAULT) TOPMARGIN
(DINQUIRE)
(DEFAULT) LEFTMARGIN
(DINQUIRE)
(DEFAULT) STATE
(INQUIRE)
(DINQUIRE)
(DEFAULT) LANG
(INQUIRE)
(DINQUIRE)
(DEFAULT) RENDERMODE
(SET)
(INQUIRE)
(DINQUIRE)
(DEFAULT) PRINTMODE
(SET)
(INQUIRE)
(DINQUIRE)
(INITIALIZE) 120V
220V
(INQUIRE) TRAY1PAPER
(DINQUIRE) TRAY2APER
TRAY3PAPER
(Delete)
Regarding the following parameter, value will be deleted (not used.)
Parameter
(DEFAULT) FONTSOURCE
(SET)
Range
0 to 300000 Sets the number of prints from start of use.
0 to 200 Sets top margin of printable area. (at 600dpi, 1 dot per unit) The value will
be set to VerSkip Register of G10 ASIC.
0 to 200 Sets left margin of printable area. (at 600dpi, 1 dot per unit) The value will
be set to HorSkip Register of G10 ASIC.
ON, OFF At Emulation=PCL or PS2, if this setting is ON, the file registered in user
area for storage will not be deleted even if emulation is changed. If this
setting=OFF, user area is all deleted by emulation change.
ENGLISH, FRENCH, Sets which one of 5 languages is used for LCD messages.
GERMAN, ITALIAN,
SPANISH
CLR, B/W Set the page rendering mode
NOR, HQ Sets the printing mode
Resets the printer operation mode settings to the default values.
Resets the printer operation mode settings to the default values.
IN, OUT Informs if paper is present or no at MF Slot.
IN, OUT Informs if paper is present or not in UPPER Tray.
IN, OUT Informs if paper is present or not in LOWER Tray.
Range
M1,,M2,,M3,,M4, C, C1, C2
Description
B/W monochrome mode
COLOR color mode
NOR normal printing
HQ add two extra rotation each page (High quality)
13 – 29
(Not used)
(Only for color print mode)