Power Source; Ground Connection - Sharp SF-7300 Service Manual

I
"-
SF-7300
S*'-735O
(4) Power source
1) The power supplyline shcu~ have a capacity of more than 15A,
capable of supplyiW more than WY. of the rated vokqe at fun
load.
2) Do not use an extension cord or operate any other quipment
fromthe same wall outlet.
(5) Ground connection
1)
Use a prcperv grounded (thr- pr~) wd odet that meets an
nationaland localebctrfcal code specifications.
How the copier machine Is carried
When moviW the c+ier, remove the receiving tray and carry it
by btiim the Identath in tie bottomof the ma&ine.
3. Releasing locks and installlrtg supplles
A. Removing the developer unit
(1) Open
tie frontpanel.
(2)
Pullthe devdcper unit kver towardsyou.
=1
1
(4) H* the ca~ handk of the deve~r unitand remove it.
NOTE: Unfeee the devefcper unit is he~ by the handle, the
deve~r unitmay not come out.
B. Releasing the optical block lock
(1)
Remove mirrorbm unit (No. 23) hddiW mrews.
(2) Remove mirrcrbese(No.4~ hofdi~ecr~ (SF-73Won~).
H4ing screw
(Frontframe stie)
2–2
. .. ..
——.-—. .
..-