Removal Of Zigzag Adjusting Nut; Removal Of Needle Holder Shaft A; Removal Of Pf Switch Assy - Brother CE-5500PRW Service Manual

Application of Disassembly
11

Removal of Zigzag adjusting nut

1. Remove the screw 1, and then remove the zigzag adjusting nut 1 from
the needle bar supporter assy..
12

Removal of Needle holder shaft A

1. Remove the spring S09
2. Remove the screw 1, and then remove the plate 1 from the needle bar
supporter assy..
3. Remove the screw 2, and then pull the shaft 2, and then remove the
needle holder shaft A 3 from the needle bar supporter assy.
13

Removal of PF switch assy

1. Remove the screw 1, and then remove the presser switch holder 1 from
the base holder assy..
2. Remove the PF switch assy. 2 from the presser switch holder 1.
3 - 38
Needle-presser module
.
1 1
2 1 1 2
3
S09
1 1
2
1