Legal Information; Liability; Warranty; Service Life - Otto Bock Lisa Instructions For Use Manual

Legal information

Similar to second-hand machines or vehicles, products that are being re-used are subject to increased strain. Fea­
tures and performance must not change in a way that could impair the safety of users or third parties during the
period of use.
The relevant product must be thoroughly cleaned and disinfected before re-use. Then have the product inspected
by qualified personnel with respect to its condition, wear and tear, and damage. Worn and damaged parts as well
as components that do not fit or are unsuitable for the user must be replaced.
Detailed information on replacing components as well as information on the required tools can be found in the ser­
vice manual.
11 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.

11.1 Liability

The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.

11.2 Warranty

Further information on the warranty terms and conditions can be obtained from the qualified personnel that has fit­
ted this product or the manufacturer's service (see inside back cover for addresses).

11.3 Service life

Expected lifetime: 4 years
The design, manufacturing and requirements for the intended use of the product are based on the expected life­
time. These also include the requirements for maintenance, ensuring effectiveness and the safety of the product.

12 Technical data

INFORMATION
► Much of the technical data below is given in mm. Please note that product settings – unless otherwise spe­
cified – cannot be adjusted in the mm range but only in increments of approx. 0.5 cm or 1 cm.
► Note that the values achieved during adjustment may deviate from the values specified below. The deviation
can be ±10 mm and ±2°.
Dimensions and weights
Model version
Overall width [mm]
Min./max. overall length [mm]
Push handle height (height of the buggy) [mm]
Front wheel diameter [mm]
Rear wheel diameter [mm]
Folding size (LxWxH) [mm]
Turning radius [mm]
Seat depth [mm]
Seat width (with/without padding) [mm]
Lower leg length [mm]
Seat height, front/rear [mm]
Back support height [mm]
Angle between back support and seat surface
(min./max.) [°]
Seat angle [°]
Max. user weight [kg]
Weight [kg]
76
Size 1
HR32130000
605
1020/1220
1,030
180
250
1,030 x 450 x 430
1,400
300/350
360/320
270–400
500/380
650
90–120
22
50
13.6
Size 2
HR32140000
655
1,020/1,220
1,030
180
250
1,030 x 450 x 430
1,450
350/400
410/370
270–400
520/380
700
90–120
22
60
14
Lisa