Safety; Explanation Of Warning Symbols; General Safety Instructions; Service Work - Otto Bock Voyager Evo Service Manual

Safety

2 Safety

2.1 Explanation of Warning Symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE

2.2 General Safety Instructions

CAUTION
Failure to observe installation instructions
Pinching, crushing due to installation errors
► Do not reach between force-actuated surfaces during installation work.
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product due to use of unsuitable tools
► When completing the tasks, only use tools that are suitable for the conditions at the place of work and for
which safety and the protection of health are assured with proper use.
► Observe the specifications in the section "Required Tools".
CAUTION
Re-use of self-locking nuts
Tipping over, falling of the user due to unintended loosening of the screw connections
► Always replace self-locking nuts with new self-locking nuts after disassembly.
NOTICE
Tipping or falling of the product
Damage to product due to lack of attachment
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping fixture to secure the product whenever you work on it at a workbench.

3 Service Work

3.1 General Information

INFORMATION
Read the service manual before starting work. Familiarise yourself with the functions of the product prior to
inspection and use. In order to do so, you can request this service manual and other documentation from the
manufacturer (see the overview of national Ottobock branches on the inside of the back cover) or download from
our homepage www.ottobock.de or www.ottobock.com.
INFORMATION
Clean and disinfect the product before commencing service work.
Observe all product care and product-specific inspection instructions in the instructions for use.
INFORMATION
Many screw connections utilise screws and nuts equipped with a thread lock. If you loosen screw connections,
be sure to replace the respective nut or screw with one equipped with a new thread lock. If new screws or nuts
with thread lock are not available, apply a medium-strength liquid thread locking compound (such as Loctite
or Euro Lock A24.20) to the existing screws.

3.2 Maintenance Schedule

Maintenance schedule as a template for copying: see Page .
6 | Ottobock
®
241
Voyager evo