Creating Workorders At The Analyzer; Creating Multiple Workorders - Siemens ADVIA 1800 Operator's Manual

f. In the Last no. box, identify the last workorder you want downloaded or enter the
number of workorders you want downloaded.
g. Select
After the workorders are downloaded, you can manage them in the same way as the
system workorders.
If a workorder already exists for the sample, the host workorder is used. See managing
host and system workorders for details.

Creating workorders at the analyzer

1. At the Menu Panel, select
2. Select
3. In the Posi.no. boxes, enter the sample position number.
4. In the Samp.no. box, enter the sample identification number.
5. Verify that the System Dilution Mode, Container Type, Sample Type, Dil. factor, Sex,
and Blood collection date entries are correct.
6. As needed, provide entries for Comment and Age.
7. Order tests by any of the following methods:
• In the Test table, select each test or ratio you want to run.
• In the Test-tbl no. box, enter the number of each test you want, then press the
period (.) key.
• In the Profiles area, select each profile you want to run.
8. To de-select all tests, select
9. To confirm, select
10. To erase all entries, select
11. To confirm, select
12. Select
The Number of workorder box increments. Automatic incrementing is assigned using the
Entry Setup window. If autoincrement is on, a new workorder displays with the next
sample number and position number incremented.
13. You can create another workorder or select
If necessary, select

Creating multiple workorders

1. At the Menu Panel, select
2. Enter information for the first sample:
NOTE:
a. Select New located above the Enter.
b. Select Routine or Interr.
System Overview
.
Execute
Request
Routine or Interr .
Delete Tests
Yes .
Batch Func
.
Yes
.
Enter
to clear the window for entry of the next workorder.
New
Request
Enter only those items you want replicated.
, then select Order Entry
.
.
to leave.
Exit
then select
Order Entry
.
.
79