Examples Of Shutdown Settings; System Available During The Night; Automatic Startup From The Sleep State; Automatic Startup With Analyzer Power Kept On - Siemens ADVIA 1800 Operator's Manual

Examples of shutdown settings

The following examples demonstrate some common scenarios that you can implement
with the Shutdown Set feature of the System Startup/Shutdown Settings window.

System available during the night

To have both the computer and analyzer available for night emergencies, use the
following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3

Automatic startup from the Sleep state

In the Sleep state, the Power Panel Operate/Standby switch (
However, electrical power is supplied only to the necessary components, and the Power
indicator (
To place system in the SLEEP state, use the following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3

Automatic startup with analyzer power kept ON

To keep analyzer power on until the automatic start up, use the following:
System p.s.
System
PRIME
WASH1
WASH2
WASH3
NOTE:
the automatic startup setting time occurs. Otherwise, the automatic startup does not occur.
In this case, you cannot shut down Windows even if you select
[ADVIA] Startup window. Additionally, the CRT screen saver does not operate.
96
Power OFF check box is cleared (no check mark).
Select Not do.
Select None.
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
) is off.
2
Power OFF check box is selected (check mark present).
Select System end.
Select None.
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
Power OFF check box is cleared (no check mark).
Select Not do.
Select None.
Do check box is cleared (no check mark).
Do check box is selected (check mark present).
Do check box is cleared (no check mark).
If System is set to Not do, you must select
1 ) remains set to
in the System list before
System end
Shutdown
ADVIA 1800 Operator's Guide
OPERATE .
on the