Creating A Profile; Creating A Load List - Siemens ADVIA 1800 Operator's Manual

Creating a profile

1. At the Menu Panel, select
2. Select
3. In the Profile set no. box, enter the profile number (1 to 150).
4. In the Comment box, enter appropriate text.
Because the first 8 characters are used to identify the profile on the Order Entry window,
you can use these characters for the profile name, and the remaining space for any
additional information.
5. Select
6. Select each test you want in the profile, then select
Select buttons below the Test table to get more tests.
7. Select

Creating a load list

NOTE:
workorders currently without position numbers, use Creating List.
1. At the Menu Panel, select
2. Select
3. Select
4. If you selected
a. In the Last no. entry format area, select the means of determining the last sample
b. In the Start no. box, enter the position number for the first sample in the load list.
c. In the Last no. box, enter the position number for the last sample in the load list or
5. Select
The system creates the load list and displays it at the
6. To print the load list, select
System Overview
Request,
Create Profile .
Test table .
.
Execute
A load list contains only workorders that have position numbers. To include
Request
.
Create List
or, if you want to specify a range of position numbers, select
All
, define the tray and cup position.
Posi.no.
in step 4c.
type the number of samples you want in the load list.
Execute .
then select
Order Entry
Return
, then select
Order Entry
Print .
.
.
.
Posi.no
window.
Worksheet
.
81