Reviewing The Calibration; Using The Calibration/Rbl History Window - Siemens ADVIA 1800 Operator's Manual

Reviewing the calibration

NOTE:
Monitor windows, refer to the online Operator's Guide.
•
Use the View Calibration Curve window to review the calibration of photometric
methods.
•
Use the ISE Monitor window to review the calibration of electrolyte methods.

Using the Calibration/RBL History window

1. At the Menu Panel, select
2. Select the calibration data to display by selecting Latest or Select:
•
•
3. If the Select option is chosen, then select one of the 3 Test Name options:
•
•
•
4. Specify a date range, to display data for calibrations performed on specific days for
the tests selected:
a. Type the
b. Type the
c. Select
5. To clear the data for the method selected, select
6. When prompted, select
106
For detailed information on how to use the View Calibration Curve and ISE
Calibration
Latest—Displays the most recent calibration data for each method on the system.
Select—Activates the Test Name box to allow a more detailed test selection.
Photometric—Displays all calibration history data for all photometric methods.
ISE Tests—Displays all calibration history data for all ISE methods.
Other—Activates the test list box to allow specific test selection (highlight each
test to display).
Start Date (yyyymmdd) of the range (if other than the default, which is
the current date).
End Date (yyyymmdd) of the range (if other than the default, which is
the current date).
Search to display the calibration data for the tests selected for the
specified date range.
NOTE: Select and drag the column heading borders to resize the columns in the
calibration data table.
Yes
, then select
Calibration/RBL History
Clear
.
.
.
ADVIA 1800 Operator's Guide