Data Transmit Window; Calibration Windows; View Calibration Curve Window; Calibration/Rbl History Window - Siemens ADVIA 1800 Operator's Manual

When needed, use the correlation data to create a real time correction formula in the
Analytical Parameters (Chemistry) window (or ISE Parameters of Setting window).
Perform any of the following tasks at this window:
• display charts
• display chart data
• create charts (add data automatically)
Use this procedure if the measurement data comes from the system
• create charts (add data manually)
Use this procedure if the measurement data comes from another blood chemistry
system
• print charts
• delete charts

Data Transmit window

Use this window to transmit all test results that you have checked in the transmit column
to the host. To see if all of the data is transmitted, check the LIS.
: The LIS mode determines if the test results with completed transmissions are
NOTE
reset.
: You can resize the column displays in the Data Transmit window. The default
NOTE
settings are restored when you exit and re-enter the window.

Calibration windows

Select
Calibration

View Calibration Curve window

Use the View Calibration Curve window to review the detailed calibration curve data for a
method, to restore a calibration, to monitor calibration trends, to obtain a summary of all
calibration information and to view RBL and calibration check information.
: While running calibrations or processing samples, the View Calibration Curve
NOTE
window is closed and cannot be viewed until the analyzer returns to the Ready or Wait
mode.

Calibration/RBL History window

The system stores data for up to 100 calibration/RBL events for each of 2 different
reagent lot pairs (R1 and R2), for a total of 200 data sets per method.
Use the Calibration/RBL History window to:
• Review the calibration history for any methods run on the system.
• Print the displayed calibration data.
• Generate a CSV file for displayed calibration data.
System Overview
to display the following Calibration menu.
47