Batch Transmission To A Host Computer; Printing Sample Data - Siemens ADVIA 1800 Operator's Manual

Batch transmission to a host computer

Use the Review/Edit window to transmit selected patient results. The data clean feature is
available to check the sample results for problems.

Printing sample data

The Print report window is only available from the supervisor logon. To print reports, go
to the Review/Edit window and use the Print report button.
CAUTION
1. At the Menu Panel, select
2. At the Review/Edit window, select the
3. At the Print Report window, select a Sample Type(T) and File Data(F):
a. If you select Archive in the File Data (F) field, the Filing File Name (I) field is
b. Select the
c. Select a file name at the Open window.
4. In the Specification range (R) field, select the
Range
5. In the Number entry format (N) field, select the
from the list.
6. In the Last no. entry format (E) field, select the
from the list.
7. In the Report Form File (O) field, select a print format for the report.
a. Select the
b. At the Open window, select a file name for the report format.
c. Select
8. Enter a start number in the Start number (S) field and a last number in the Last number
(L) field.
94
Tests on the Print Report form must be in the same order as they display at the
System Test List window to avoid incorrect positioning of results on the print
report.
Do not modify the order
after the initial setup. If you reposition any test names on the System Test List
window after initial setup, results for samples already run could be associated with
the wrong test name.
Request
activated.
Open button.
or from the list.
All
button.
Open
The Open window displays, defaulting to the ETC folder.
Two sample report formats are available:
• the Chart.frm file is formatted for a single sample.
• the Consoled.frm file is formatted for multiple samples.
Customer defined print formats also display in the folder.
Open .
of the test names at the System Test list window
, then select
Review/Edit
button.
Print Report
in the field and select
arrow
in the field and select a format
arrow
in the field and select a format
arrow
ADVIA 1800 Operator's Guide
.
Input