Setting System Parameters Window; New Test Definition Window; Analytical Parameters (Chemistry) Window - Siemens ADVIA 1800 Operator's Manual

Setting System Parameters window**

Use this window to enter or change system parameters, which define the system
processing environment.
Perform any of the following tasks at this window:
• define and edit system parameters
• view system parameters
• print system parameters

New Test Definition window*

Use this window to set up new tests, calibration definitions, sample container definitions,
and QC sample definitions. The New Test Definition window provides easy step-by-step
procedures.

Analytical Parameters (Chemistry) window

Use this window to set up chemistry methods.
Siemens methods are predefined when the system is received. For predefined methods,
only expected values, rerun conditions, and correction formulas should be modified.
You can define new methods. The system can store up to 200 chemistry methods in this
window (including predefined methods).
Methods 1–150 are predefined methods. The analytical conditions are predefined. Some of
the fields of the analytical conditions are grayed out and cannot be edited.
Some of the parameters are disabled and are not editable by the User, Supervisor, Tech-
manager, or FSE. The Analytical Parameters in the following table are disabled.
Number
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
64
Analytical Condition
R1 volume
R2 volume
R1 diluent vol
R2 diluent vol
Serum dil.s.vol
Serum dil.volume
Serum dil.posit
Urine set
Urine dil.method
Urine dil.samp.vol
Urine diluent vol
Urine diluent pos
Reaction time
Reagent 1 stir
Sub- Analytical Calculation Method
Condition Settings
Name M-DET.P.l
M-wave.L M-DET.P.m
S-wave.L M-DET.P.n
Analy.mthd Check D.P.I
S-DET.P.r
Reac. Type
Max Limit
Limit Value
Variance
*Prozone
Prozone form
Prozone limit
Prozone judge
Judge limit
ADVIA 1800 Operator's Guide