Completing Installation and Cabling of the CTS 1100
Step 4
Install the bezel around the perimeter of the display by completing the following steps:
a.
b.
c.
Figure 3-38
Attaching the Bezel to the Display
19
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field Replaceable Unit Guide
3-48
Using at least two people, lift and place the bezel around the perimeter of the display.
Lightly press the posts at each corner of the bezel.
Place the v-clips over the posts (four posts and clips in total) to secure it to the edges of the display.
29
Chapter 3
Assembling and Mounting a Cisco TelePresence System 1100
OL-19695-01