General Room Requirements And Recommendations - Cisco TelePresence System 1100 Assembly Manual

Cisco TelePresence System 1100 Room
Recommendations
Revised: February 7, 2012, OL-19695-01
The Cisco TelePresence System 1100 (CTS 1100) is designed to be used in a multipurpose room (for
example, a conference room). However, to ensure that you have the best conferencing experience, Cisco
recommends that you optimize your room by using the guidelines and recommendations in this chapter.
This chapter includes the following sections:
•
•
•
•
•
•
•
•
•
•

General Room Requirements and Recommendations

The following are required elements for a CTS 1100 room:
•
•
•
•
•
OL-19695-01
General Room Requirements and Recommendations, page
Minimum Room and Table Dimensions, page 2-2
Recommended Table Height and Minimum Table Width, page 2-3
Recommended Table Finishes, page 2-3
Room Color Recommendations, page 2-3
Lighting Recommendations, page 2-4
Acoustic Recommendations, page 2-4
Power Requirements, page 2-5
HVAC Considerations, page 2-5
Auto Collaboration Data Display, page 2-8
You must use an enclosed space.
You must have a room with the minimum dimensions that are specified in the
Table Dimensions" section on page
The room must meet minimum heating, ventilation and air conditioning (HVAC) requirements that
are provided in the "Power Requirements" section on page
The room must be supplied with electrical power as specified in the
on page 2-5.
The power and Ethernet outlets must not be positioned directly behind the CTS 1100 unit.
Cisco TelePresence System 1100 Assembly, First-Time Setup, and Field Replaceable Unit Guide
C H A P T E R
2-1.
2-2.
2-5.
2
"Minimum Room and
"Power Requirements" section
2-1